HNG80 is a compact woven, metallized polyester netting for shielding of high-frequency radiation (HF) and low-frequency electric fields (LF). - PDF

Please download to get full document.

View again

of 9
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Information Report
Category:

Advertisement

Published:

Views: 3 | Pages: 9

Extension: PDF | Download: 0

Share
Related documents
Description
Miscellaneous shielding products 1/8 Metallized polyester netting HNG8 (HF+LF) Our recommendation! HNG8 is a compact woven, metallized polyester netting for shielding of high-frequency radiation (HF) and
Transcript
Miscellaneous shielding products 1/8 Metallized polyester netting HNG8 (HF+LF) Our recommendation! HNG8 is a compact woven, metallized polyester netting for shielding of high-frequency radiation (HF) and low-frequency electric fields (LF). Our standard product for easy bonding on walls, ceilings and floors! This professional product is typically used for ministries of defence, banking houses, laboratories, etc. Now available for private use! Typical application for bonding interior on walls, ceilings, floors, as intermediate layer, for drywall constructions, loosely laid, etc. Width: 66 cm Length: By the meter / 3 m roll / 1 m roll Attenuation: 8 db at 1 GHz Weight: 8 g/m² Material thickness:.7 mm Color: Anthracite / Brown Tensile strength: Very good in both directions, 22 N/mm Materials: Polyester, copper, nickel, protection coating Surface conductivity:.2 ohm (square resistance R ) In case of processing HNG8 as an intermediate layer we recommend using our dispersion glue DKL9 for adhesion. The wall and the backside of HNG8 should be coated with a paint roller. Insert EMR-Protec the material wet on wet. Fix it manually (with disposable gloves) and press a gummed Start roller against frequency: the fleece 3 MHz to get a crease-free surface. Work quickly and strip by strip only so that the DKL9 glue does not dry. A crease-free adhesion is only possible on perfectly level surfaces! Structured surfaces (ingrain wallpaper, textured plastering) have to be smoothed. If that is not possible, we recommend using our shielding paints HSF54 or HSF92. low frequency (LF) electric fields. For professional grounding we recommend our grounding plug EST for self laying application, or our grounding strap EB in combination with our grouding set ES for adhesive bonding with our dispersion glue DKL9. The shielding attenuation is regularly tested in our own laboratory or by Professor Dipl.Ing. Pauli at the University of the German Federal Armed Forces in Munich due to the standards ASTM D4935 and/or IEEE-STD Current expert report is available uppon request. Page 13-9 EMR-Protection Shielding mesh HNG8 Start frequency: 3 MHz Standard ASTM D4935 Stop frequency: 4 MHz Miscellaneous shielding products 2/8 Metallized polyester netting HNG1 (HF+LF) HNG1 is a compact woven, heavy metallized polyester netting for shielding of high-frequency radiation (HF) and low-frequency electric fields (LF). Maximum shielding product with over 1 db. This professional product is typically used for ministries of defence, banking houses, laboratories, etc. Typical application for bonding interior on walls, ceilings, floors, as intermediate layer, for drywall constructions, loosely laid, etc. Width: 145 cm Length: By the meter / 2 m roll Attenuation: 1 db at 1 GHz Weight: 14 g/m² Material thickness:.8 mm Color: Anthracite / Brown Tensile strength: Very good in both directions, 22 N/mm Materials: Polyester, copper, nickel, protection coating Surface conductivity:.3 ohm (square resistance R ) In case of processing HNG1 as an intermediate layer we recommend using our dispersion glue DKL9 for adhesion. The wall and the backside of HNG1 should be coated with a paint roller. Insert the material wet on wet. Fix it manually (with disposable gloves) EMR-Protec and press a gummed roller against the fleece to get a crease-free surface. Work quickly Start and frequency: strip by strip 3 MHz only so that the DKL9 glue does not dry. A crease-free adhesion is only possible on perfectly level surfaces! Structured surfaces (ingrain wallpaper, textured plastering) have to be smoothed. low frequency (LF) electric fields. For professional grounding we recommend our grounding plug EST for self laying application, or our grounding strap EB in combination with our grouding set ES for adhesive bonding with our dispersion glue DKL9. at the University of the German Federal Armed Forces in Munich due to the standards ASTM D4935 and/or IEEE-STD Current expert report is available uppon request. Page 14-9 EMR-Protection Shielding mesh HNG1 Start frequency: 3 MHz Standard ASTM D4935 Stop frequency: 4 MHz Miscellaneous shielding products 3/8 Metallized nylon fleece HNV8 (HF+LF) HNV8 is a fine, metallized nylon fleece for shielding of highfrequency radiation (HF) and low-frequency electric fields (LF). This professional product is typically used for ministries of defence, banking houses, laboratories, etc. Now available for private use! Typical application interior preferable loosely laid or for stapling in drywall constructions, etc. Width: 1 cm Length: By the meter / 2 m roll Attenuation: 8 db at 1 GHz Weight: 85 g/m² Material thickness:.15 mm Color: Anthracite / Brown Tensile strength: Very good in both directions, 5 N/mm Materials: Nylon, copper, nickel, protection coating Surface conductivity:.8 ohm (square resistance R ) In case of processing HNV8 as an intermediate layer we recommend using our dispersion glue DKL9 for adhesion. The wall and the backside of HNV8 should be coated with a paint roller. Insert the material wet on wet. Fix it manually (with disposable gloves) and press a gummed roller against the fleece to get a crease-free surface. Work quickly and strip by strip only so that the DKL9 glue does not dry. A crease-free adhesion is only possible on perfectly level surfaces! Structured surfaces (ingrain wallpaper, textured plastering) have to be smoothed. If that is not possible, we recommend using our shielding paints HSF54 or HSF92. low frequency (LF) electric fields. For professional grounding we recommend our grounding plug EST for self laying application, or our grounding strap EB in combination with our grouding set ES for adhesive bonding with our dispersion glue DKL9. at the University of the German Federal Armed Forces in Munich due to the standards ASTM D4935 and/or IEEE-STD Current expert report is available uppon request. Page 15-9 EMR-Protection Shielding fleece HNV8 Start frequency: 3 MHz Standard ASTM D4935 Stop frequency: 4 MHz EMR-Protec Start frequency: 3 MHz Miscellaneous shielding products 4/8 Stainless steel gauze HEG1 (HF+LF) Our recommendation! HEG1 is a finely woven, noncorrosive stainless-steel gauze for shielding of high-frequency radiation (HF) and low-frequency electric fields (LF). Typical application for the interior and exterior under-plaster in upgraded insulations, in roof areas, at drywall constructions, as flyscreen, loosely laid, etc. HEG 12 Width: 1 cm Length: By the meter / 25 m roll Attenuation: 4 db at 1 GHz Mesh width: 1. mm, wire diameter:.16 mm, material thickness:.32 mm, open area 74 % Weight: 26 g/m² Color: Silver Fire-proof material, A1 according DIN 412:1994 Surface conductivity:.1 ohm (square resistance R ) In case processing the HEG1 under plaster you should work with a preferably fine and organic filler. Under the floor covering (laminate, parquet, PVC coating, etc.) the HEG1 is being fixed with the adhesive used for the floor covering. For drywall construction and in roof area the mesh elements can be bolt or stapled together. The rule is: Always overlapp the single elements at least 5 cm. For grounding use the perforated stainless steel tape ELB by screwing it right across the elements into the surface. low frequency (LF) electric fields. For professional grounding we recommend our grounding plug EST for self laying application, or our perforated stainless steel tape ELB for application under-plaster or in drywall constructions. at the University of the German Federal Armed Forces in Munich due to the standards ASTM D4935 and/or IEEE-STD Current expert report is available uppon request. -9 EMR-Protection Shielding mesh HEG1 Start frequency: 3 MHz Standard ASTM D4935 Stop frequency: 4 MHz Page 16 Miscellaneous shielding products 5/8 Stainless steel gauze HEG3 (HF+LF) HEG3 is an extremely fine woven, noncorrosive stainlesssteel gauze for shielding of high-frequency radiation (HF) and low-frequency electric fields (LF). Typical application due to the thin filaments especially as flyscreen. In comparison to HEG1, due to the smaller mesh width, the shielding attenuation is better at high frequencies. Width: 12 cm Length: By the meter / 25 m roll Attenuation: 4 db at 1 GHz Mesh width:.3 mm, wire diameter:.8 mm, material thickness:.16 mm, open area 62 % Weight: 2 g/m² Color: Silver Fire-proof material, A1 according DIN 412:1994 Surface conductivity:.3 ohm (square resistance R ) In case processing as flyscreen, the application is identical to that of a regular flyscreen in commercial tenter frames. In case processing the HEG3 under plaster you should work with a finest organic filler. Under the floor covering (laminate, parquet, PVC coating, etc.) the HEG3 is being fixed with the adhesive used for the floor covering. For drywall construction and in roof area the mesh EMR-Protec elements can be bolt or stapled together. The rule is: Always overlapp the single elements Start at frequency: least 5 cm. For 3 MHz grounding use the perforated stainless steel tape ELB by screwing it right across the elements into the surface. low frequency (LF) electric fields. For professional grounding we recommend our grounding plug EST for self laying application, or an own grounding solution with the window frame. at the University of the German Federal Armed Forces in Munich due to the standards ASTM D4935 and/or IEEE-STD Current expert report is available uppon request. Page 17-9 EMR-Protection Shielding mesh HEG3 Start frequency: 3 MHz Standard ASTM D4935 Stop frequency: 4 MHz Miscellaneous shielding products 6/8 Carbonized polyester fleece NCV95 (LF) NCV95 is a fine, cabonized polyester fleece for shielding of low-frequency electric fields (LF). Typical application in the interior for walls, ceilings and floors as intermediate layer, in drywall constructions or for loose layings. Further together with our grounding plug EST as a cheap earthed mattress pad. Width: 95 cm Length: By the meter / 2 m roll Attenuation: 8 db Weight: 9 g/m² Material thickness:.55 mm Color: Black Tensile strength: 26 N/mm in longitudinal direction, 35 N/mm in transverse direction Materials: Polyester, carbon coating Surface conductivity: 1 ohm (square resistance R ) In case of processing NCV95 as an intermediate layer we recommend using our dispersion glue DKL9 for adhesion. The wall and the backside of NCV95 should be coated with a paint Vorderseite roller. / Insert Front side the material wet on wet. Fix it manually (with disposable gloves) and press a gummed roller against the fleece to get a crease-free surface. Work quickly and strip by strip only so that the DKL9 glue does not dry. A crease-free adhesion is only possible on perfectly level surfaces! Structured surfaces (ingrain EMR-Protec wallpaper, textured plastering) have to be smoothed. If that is not possible, we recommend Start frequency: using our shielding paint NSF34. Used as earthed mattress pad, NCV95 has to be grounded from an electrician with 5 Hz our grounding plug EST. Due to the conductive surface this material can be contacted and grounded easy to shield low frequency (LF) electric fields. For professional grounding we recommend our grounding plug EST for self laying application, or our grounding strap EB in combination with our grouding set ES for adhesive bonding with our dispersion glue DKL9. at the University of the German Federal Armed Forces in Munich. Current expert report is available uppon request. Page 18 Miscellaneous shielding products 7/8 Window films: RDF5, RDF62, RDF72 (HF) RDFxx are precious-metal coated and self-adhesive films for the protection against high-frequency radiation (HF). Our recommendations: RDF62-Clear has a perfect ratio between light transmission, color of daylight and good attentuation. RDF72-Premium is our premium film consisting of 1 metal layers for highest quality demands. Unrivaled attenuation and a very high degree of light transmission. RDF62 22 db RDF5 28 db RDF72 32 db Width: 76 cm and 152 cm (RDF72 only available with 152 cm) Length: By the meter / 3 m roll Material thickness: RDF5, RDF62: 37.5 µm; RDF72: 75 µm Mounting: Water-activated, pressure-sensitive adhesive to the back Shielding certificate to IEEE-STD-2996 (see diagram) RDF62- RDF5- RDF72- Clear Standard Premium Application Interior Interior Interior Application on heat-absorbing glass No No No Edge sealant necessary No No Yes: FKV5 Attenuation / Shielding effectiveness at 1 GHz 22 db / % 28 db / % 32 db / % Light transparency 62 % 5 % 72 % Color of daylight Bright grey Bright grey Bright Green Reflections from the interior Bright silver Golden None Reflections from the exterior Bright silver Silver None Mounting accessories The mounting requires a bit of craftsmanship skills and adequate accessories: Mounting concentrate FMK3 for wet bonding, 3 ml for.5 liter of water. Plastic scraper FVR1 for a bubble-free bonding. With the felt-edge the water and the bubbles can be pressed out, without sctratching the film-surface. Aerosol can FSF,.5 liter EMR-Protection Shielding window films RDF62, RDF5, RDF72 Start frequency: 3 MHz Standard ASTM D4935 Vorderseite / Front Stop sidefrequency: 4 MHz EMR-Protection Shielding window films RDF62, RDF5, RDF72 Start frequency: 3 MHz Standard ASTM D4935 Stop frequency: 4 MHz RDF62 RDF62 RDF5 RDF5 RDF72 RDF72 Page 19 Miscellaneous shielding products 8/8 Mu-metal foil NMF25 (magnetic field LF) NMF25 is a Mu-metal foil for shielding of low-frequency magnetic fields. Due to the low electrical resistance even for shielding low-frequency electric fields (LF) and high-frequency radiation (HF). Zur kleinflächigen Verarbeitung mit doppelseitigem Klebeband oder großflächigen Verklebung mit Kleber. Kann leicht gebogen und gefaltet werden und leicht mit einer Schere oder einem Messer geschnitten werden. Gute Korrosionsbeständigkeit in normaler Umgebung. Width: 25 cm Length: By the meter / 5 m roll Attenuation LF magnetic field: 16 db For more shielding use multiple layers! Attenuation HF: 1 db at 1 GHz Saturation flux density:.8 T Weight: 9 g/m² Material thickness:.1 mm Color: Silver Materials: Alloy of nickel, iron, molybdenum Surface conductivity:.4 ohm (square resistance R ) Bei Verarbeitung in Elektronikanwendungen mit handelsüblichen doppelseitigen Klebebändern am Untergrund verkleben. Bei Verarbeitung auf Wänden, Decken und Böden (zur Abschirmung von Kabeln oder Sicherungskästen) Verklebung mit dickflüssigem Kleber mit hoher Haftkraft. Die Bahnen 1 cm überlappend verarbeiten. Großflächig arbeiten, einen Sicherungskasten mindestens mit 2 x 2 m abschirmen! Abgetrocknet kann die Folie mit handelsüblichen Dispersionsfarben überstrichen werden. low frequency (LF) electric fields. For professional grounding we recommend our grounding strap EB in combination with our grouding set ES. at the University of the German Federal Armed Forces in Munich due to the standards ASTM D4935 and/or IEEE-STD Current expert report is available uppon request. Important: The diagram above shows the high-frequency attenuation! The LF magnetic field attenuation is 16 db. -9 EMR-Protection Mu-metal foil NMF25 Start frequency: 3 MHz Standard ASTM D4935 Stop frequency: 4 MHz Page 2 - / Mounting accessories 1/1 Conductive dispersion glue DKL9 Special coordinated dispersion glue for binding our sheet materials to walls, ceilings, floors, doors, etc.. High quality class water-resistant special glue based on acrylics, breathable, lowemission and solvent-free. Electrically conductive, that the materials dont get isolated for grounding. The application is identical with a wallpaper glue! Avoid bucklings and wrinkles in the materials! The wall surface and the backside of the material is primed with a painter s roller. The material is inserted wet-on-wet and fixed by hand (with disposable gloves) or with a pressure roller. Work quickly and strip by strip so that the glue won t get dry. Specially for the following materials: HNG8, HNG1, HNV8, NCV95 Delivery sizes: 5 liter Coverage: 17.5 m² - 25 m², depending on the underground Ingredients: Acrylic binder, water, carbon black, additives, preservative Color: Black Surface conductivity: 4 ohm (square resistance R ) Page 21
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks