Technical specification Sandvik LH203-08.pdf | Steering | Brake

Please download to get full document.

View again

of 3
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Information Report
Category:

Documents

Published:

Views: 10 | Pages: 3

Extension: PDF | Download: 0

Share
Related documents
Description
TECHNICAL SPECIFICATION Sandvik LH203 LH203-08 (12.11.2010) 1/3 Sandvik Mining and Construction reserves the right to change this ISO 9001 ISO 14001 San
Transcript
   Sandvik LH203 TECHNICAL SPECIFICATION LH203-08 ( 12.11.2010)  1/3 Sandvik Mining and Construction reserves the right to change this specification without further notice ISO 9001 CERTIFICATEDFIRM   ISO 14001 CERTIFICATEDFIRM   Sandvik Mining and Construction Oy P.O. Box 434 20101 Turku, Finland Tel. +358 205 44 131 Fax +358 205 44 130 www.smc.sandvik.com     Sandvik LH203 TECHNICAL SPECIFICATION LH203-08 ( 12.11.2010)  2/3 Main dimensions Total length 7 040 mm (277 ) Width without bucket 1 420 mm (56 ) Maximum width 1 480 mm (58 ) Height without safety canopy 1 595 mm (63”) Height with safety canopy 1 840 mm (72 ) Weights Operating weight 8700 kg (19 180 lb) Total loaded weight 12 200 kg (26 897 lb) Shipping weight 8500 kg (18 739 lb)  Axle weights without load: front axle 3700 kg (8 157 lb) rear axle 5000 kg (11 023 lb)  Axle weights with load: front axle 9050 kg (19 952 lb) rear axle 3150 kg (6 945 lb) Unit weight is dependent on the selected options Capacities Tramming capacity 3500 kg (7 716 lb) Breakout force, lift 61 kN (6 220 kg) (13 710 lb) Breakout force, tilt 55 kN (5 600 kg) (12 360 lb) Tipping load 8300 kg (18 298 lb) Bucket std. 1,5 m³ (2.0yd³), HB500/400 Bucket motion times Raising time 5.5 s Lowering time 2.9 s Tipping time 3.0 s Driving speeds forward and reverse 1st gear 5.0 km/h (3.1 mph) 2nd gear 9.3 km/h (5.8 mph) 3rd gear 24.0 km/h (14.9 mph) Frame Rear and front frame Welded steel construction Central hinge Box constructed, adjustable Standard engine Diesel engine Engine DEUTZ BF6L914 Output 71,5 kW/2300 r/min (95 hp) Torque 400 Nm 1650 r/min Number of cylinders 6 Displacement 6472 cm³ Cooling system Air cooled Combustion principle Turbo charged, direct injection, four stroke Electric system 24V  Air filtering Donaldson Exhaust system Double wall exhaust pipe with catalytic purifier / muffler Fuel tank capacity 130 l (43 gal.) Standard converter Dana SOH, C2122 Gearbox Dana SOH, RT20324 Power shift (mechanical gear shift control) transmission, three gears forward and reverse Standard axles Front axle Dana 14D1441 LCB, No-Spin differential, fixed Rear axle Dana 14D1441 LCB, oscillating ± 10° Oscillation stabilizer Standard tyres Size and type 12.00x20 L5S, 20ply Brand and type subject to availability  Air pressure, front 600 kPa (6,0 bar) (87.1 psi)  Air pressure, rear 350 kPa (3,5 bar) (50.8 psi) Other type of tyres available to user’s choice. In certain applications the productive capabilities of the loader may exceed the TKPH value given by tyre manufacturer. Sandvik Mining and Construction Oy recommends that the user consult their tyre supplier to evaluate conditions and to find the best solution for application. Standard Canopy ROPS/FOPS certified safety canopy. Height 1840 mm (72”) Steering hydraulics Full hydraulic, centre-point articulation, power steering with one double acting cylinder. Steering controlled by stick. Emergency steering is optional. Turning angle ± 40° Turning radius (with std bucket): inner 2740 mm (108”) outer 4685 mm (184 ) Main components in steering system: Main valve Servo control valve Steering cylinder ø 100 mm (3,9 ) Steering and servo hydraulic pumps Pressure settings: Steering hydraulics 15.0 MPa (150 bar) Shock load valves 20.0 MPa (200 bar) Bucket hydraulics Dual stick bucket and boom control. Full hydraulic, mechanically controlled system, equipped with one gear type pump. Oil flows to bucket hydraulic system from the main pump and from the steering hydraulics. Main components: Boom system Direct dump Lift cylinder ø 180 mm (7.1 ) Tilt cylinder ø 140 mm (5.5 ) Servo control valve Main valve Pump for bucket hydraulics Fittings JIC Pressure setting for: Bucket hydraulics 21.0 MPa (210 bar) Relief valves 24.0 MPa (240 bar) Piston side of the cylinder 6.0 MPa (60 bar) Hydraulic oil tank capacity appr. 120 l (32 gal) Standard brakes Service brakes are hydraulically operated multi-disc brakes on all wheels with two separate circuits for the front and rear axle. Parking brake is spring applied, hydraulically released dry disk brake affecting on the front axles drive line. In case of a sudden pressure drop in brake hydraulics the parking brake functions also as an emergency brake. Main components in the brake system: Pressure accumulator Brake pedal valve Parking brake Charging valve Standard Lubrication system Centralized manual lubrication Sandvik Mining and Construction reserves the right to change this specification without further notice ISO 9001 CERTIFICATEDFIRM   ISO 14001 CERTIFICATEDFIRM   Sandvik Mining and Construction Oy P.O. Box 434 20101 Turku, Finland Tel. +358 205 44 131 Fax +358 205 44 130 www.smc.sandvik.com     Sandvik LH203 TECHNICAL SPECIFICATION LH203-08 ( 12.11.2010)  3/3 Electrical equipment  Alternator 24 V 55 A, Bosch Batteries 2 x 12 V 70 Ah Starter 4 kW, 24 V, Bosch Driving and working lights: 2 pcs in front, 65 W Nordic lights 2 pcs in rear, 65 W Nordic lights Parking and brake lights 2 pcs in front, 5W LED lights 2 pcs in rear 5 W LED lights Electrical gauges Reverse alarm Lockable main switch Safety equipment Seat belt Lockable main switch Reverse alarm Others Decal language EU-languages Standard manuals Instructions Manual -Operator's Manual EU-languages -Maintenance Manual EU-languages Parts Manual English Service and Repair Manual  English ToolMan CD, (2 pcs) In pdf format - Instructions Manual -Operator's Manual -Maintenance Manual - Parts Manual - Service and Repair Manual Main options: * replaces standard equipment ã  * Bucket size 1.5 m 3  (2.0yd 3 ), width 1690 mm (67”), HB500/400. ã  * Bucket size 1.75 m 3  (2.3yd 3 ), width 1690 mm (67”), HB500/400. ã  * Ejector bucket 1.5 m 3  (2.0yd 3 ). ã  Air filtering: oil bath and zyclone ã  * Electrical gear shifter. ã  * Automatic central lubrication. ã  Oil cooler for hydraulic ã  RRC HBC complete ã  RRC HBC interface ã  RRC recovery kit, hook included. ã  Fire suppression system ANSUL, 6 nozzles. ã  Sandvik FS1000 fire suppression system ã  Fire extinguisher 6 kg. ã  Accordance with CE-norms (CEN) ã  Emergency steering (CEN). ã  Disassembly needed shaft dim: TBA. ã  Rotating beacon (CEN with RRC) ã  Wiggins fuel fill system ã  Arctic package (preheater for engine- and hydraulic oil) ã  CatBase/LinkOne spare part manuals and additional Instructions, Workshop, Spare part manuals, ToolMan CD’s are available. Sandvik Mining and Construction reserves the right to change this specification without further notice ISO 9001 CERTIFICATEDFIRM   ISO 14001 CERTIFICATEDFIRM   Sandvik Mining and Construction Oy P.O. Box 434 20101 Turku, Finland Tel. +358 205 44 131 Fax +358 205 44 130 www.smc.sandvik.com  
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks