Original Launch X431 X-431 PAD User Manual

Please download to get full document.

View again

of 75
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Information Report



Views: 10 | Pages: 75

Extension: PDF | Download: 1

Related documents
Original Launch X431 PAD Supports 3G WIFI Without Inner printer http://www.obdii365.com/wholesale/2013-new-design-multi-language-launch-x431-pad-auto-scanner.html Factory Newest Version. Configured with Windows Embedded Standard 7 OS, Pluggable DBScar connector. With wireless (3G, Wi-Fi) and Wired Network, One-key update and vehicle diagnostic functions (via Bluetooth communication.
  Version: V1.00.002Revised date: 2012-11-30  II LAUNCH  X-431 PAD   User's Manual FCC INFORMATION This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:— Reorient or relocate the receiving antenna.— Increase the separation between the equipment and receiver.— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.— Consult the dealer or an experienced radio/TV technician for help.Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.RF Exposure: A distance of 20 cm shall be maintained between the antenna and users, and the transmitter module may not be co-located with any other transmitter or antenna.  III LAUNCH  X-431 PAD   User's Manual  All rights reserved! No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means of electronic, mechanical, photocopying and recording or otherwise, without the prior written permission of LAUNCH. This manual is designed only for the use of this unit. LAUNCH is not responsible for any use of this manual on the other units.The manual and all the samples herein can be changed without prior notice. Neither LAUNCH nor its affiliates shall be liable to the purchaser of this unit or third parties for damages, losses, costs or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this unit, or unauthorized modications, repairs, or alterations to this unit, or failure to strictly comply with LAUNCH operating and maintenance instructions. LAUNCH shall not be liable for any damages or problems arising from the use of any options or any consumable products other than those designated as Original LAUNCH Products or LAUNCH Approved Products by LAUNCH. Notice: other product names used herein are for identication purposes only and may be trademarks of their respective owners. LAUNCH disclaims any and all rights in those marks. This device is only for professional technicians and maintenance personnel. Registered Trademark LAUNCH is a registered trademark of LAUNCH TECH. CO., LTD. (LAUNCH) in China and other countries. In other countries where any of the LAUNCH trademarks, service marks, domain names, logos and company names is not registered, LAUNCH claims other rights associated with unregistered trademarks, service marks, domain names, logos and company names. Other products or company names referred to in this manual may be trademarks of their respective owners. You may not use any trademarks, service marks, domain names, logos or company name of LAUNCH or any third party without permission from the owner of the applicable trademarks, service marks, domain names, logos or company name. You may visit LAUNCH at http://www.dbscar.com for the information of Launch’s X-431 PAD and the other specialized diagnostic tools, or contact Launch by visiting http://www.cnlaunch.com or writing to Customer Center, LAUNCH TECH. CO., LTD., Launch Industrial Park, North of Wuhe Avenue, Banxuegang, Bantian, Longgang, Shenzhen, Guangdong. P.R. China, to request written permission to use materials on this manual for purposes or for all other questions relating to this manual.  IV LAUNCH  X-431 PAD   User's Manual Precautions on Operating Vehicle’s ECU Do not disconnect the vehicle inner consumer when the ignition switch is on. ã  High voltage transients may encounter at the moment of disconnecting, which may damage the sensors and the ECU.Protect the computer from magnetic object (such as wireless speaker) ã  Do cut off the power supply of ECU system before welding on the vehicle. ã  Pay more attention to the ECU and the sensors when the operation is next to ã  them.Ground yourself when you disassemble PROM, otherwise ECU and sensors ã  will be damaged by static electricity.Do not use the pointer ohmmeter instead of DMM to test the ECU and the ã  sensor without special requirement.Do not test electric devices in relation with ECU with a test lamp unless ã  otherwise expressly provided.Do wear a metal ground strip that one end around your wrist and the other to ã  the vehicle body when you get in and out the vehicle. Do connect ECU harness connector rmly, otherwise electro elements, such ã  as IC inside ECU, will be damaged. Precaution on Operation The appliance is a sophisticated electronic device, never have it clashed ã  when in use.Make sure the appliance is properly connected to the DLC to avoid ã  communication interruptions. During operation, keep the screen upward and leveled.Don’t disconnect the wired network or Wi-Fi network while software updating ã  or sending E-mail, otherwise, it will be interrupted. After the operation, the stylus shall be inserted into the hole on the back of ã  the main unit, and put away the cable and connector, etc accessories to the box to avoid the lost.Handle with care. Avoid collision. Unplug the power after operation. ã  
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks