Tuning the Pietta Part One | Revolver | Firearms

Please download to get full document.

View again

of 19
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Information Report
Category:

Documents

Published:

Views: 7 | Pages: 19

Extension: PDF | Download: 0

Share
Related documents
Description
Tuning the Pietta Part One
Transcript
  1   Tuning the Pietta Cap & Ball for Competition Part 1: Diagnosing the Problem Areas By Larsen E. Pettifogger SASS # 32933L Cap and ball handguns are fun to shoot and if tuned properly can be very reliable. However, many pards buy a pair, go to a match, have problems, and then quickly become disillusioned with them and write them off as difficult and unreliable. We are going to go through the steps necessary to tune a Pietta C&B for competition. Like many things, a picture is worth a thousand words. So, I will try to illustrate as much as possible what needs to be done and try to suggest tools and ways of doing the job that a good home gun tinkerer can use to tune his/her Pietta. The revolver chosen for our tuning exercise is shown in Photo 1. I picked up a pair of these from EMF at EOT 2007. They were under $200.00 each and it is amazing that these guns can be produced, shipped halfway around the world, and still sold for such an amazingly low price. They are described in the EMF catalog as the “1851 Navy Sheriff Model in .44 caliber with a 5 1/2” barrel.” As an historical note, there is no such thing as a .44 Navy. Whenever Colt advertised a revolver as being of “Navy” caliber, by definition it meant a .36. A revolver of “Army” caliber was a . 44. Uberti tends to offer only guns that copy original Colts. Pietta mixes and matches parts to come up with a wide variety of interesting, but historically incorrect models. Our revolver is actually an 1860 Army frame and cylinder mated to a set of “Navy” grips with an octagon barrel bored out to .44. Although listed as a 5 1/2” barrel, it is actually closer to  2   4 3/4”. It will be a great shooter when we are done with it, and the shorter barrel will be quicker out of the holster than a 7 1/2” or 8” mod el. Before we get started we need to discuss some of the tools needed for our tune-up. The first thing anyone needs when working on guns is a quality set of hollow ground screwdrivers. Hollow ground screwdrivers are machined so the sides of the tip that enter the screw slot are parallel. A regular screwdriver simply has tapered sides that taper all the way to the tip. Photo 2 shows a hollow ground and a standard screwdriver. The parallel sides of a hollow ground screwdriver fit the screw slot tightly from the top to the bottom of the screw slot. A standard screwdriver fits in the slot like a wedge and only engages the top part of the screw slot. The quickest way to bugger a gun screw is to use the wrong type of screwdriver. We are going to be doing a lot of internal work and its hard to get light down inside the gun to see what is going on. Photo 3 shows an LED light that has a twistable neck and a magnet on the end of the base. I picked this thing up in the checkout line at Walgreens Drug Store. It is an amazing little tool that costs less than $5.00 and can be found at a lot of drug and hardware stores. No matter what kind of light you have, your head or something always seems in the way and you can’t see down in small holes. This littl e gizmo solves that problem. Photo 4 shows a burr remover/metal scraper.  3   If your Pietta is like most, you will need one of these for the tune-up. (As an example, go to Enco.com and type in #380-0840. This should take you to a simple de-burr/scraper tool.) You will also need a variety of needle files, preferably fine diamond needle fines (since some parts are hardened and difficult to file with a regular file), and some honing stones. Lastly, you will need a drill press and drill press vise. The first step in any tune-up is to inspect the exterior of the gun and test the action to identify problem areas that will need fixing. The first thing, which isn’t exactly a “problem” but is an issue for many, is the grip shape. Photo 5 shows an srcinal 18 61 Navy (same grip as a 51 Navy) on top with our Pietta below.  4   Colt spent a lot of time coming up with what many believe is the best grip ever put on a handgun. The 1851 Navy grip was so popular it was carried over into the Single Action Army. The srcinal back strap has a compound curve (Photo 5, A) that starts at the top of the back strap and runs almost to the bottom of the grip frame and then curves slightly outward at the bottom (Photo 5, B). The Pietta grip is narrower front to back at “A” and the back strap is absolutely flat before turning out at “B”. The Pietta grip looks more like a trumpet bell. The wooden grip itself on the Colt is also thinner than the Pietta. For some, because of the angle of the back strap, the Pietta grip tends to cause the gun to point high. (Much like a Colt 1911 with a flat or arched mainspring housing.) We will modify the grip to be slightly more like an srcinal Colt. The front strap is pretty close to an srcinal and is fine as is. Cock the action and look for anything that causes friction or binding. Raise and lower the hammer a few times and put SLIGHT pressure side-to-side on the hammer. On our
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks